ADC120-12V/24V Generator Actuator + ESD5500E Speed Controller + MSP675 Sensor--W

Description

ADC120-12V/24V Generator Actuator + ESD5500E Speed Controller + MSP675 Sensor
Description
Actuator ADC120-12V/24V optional
1set=
1PCS Electric Actuator ADC120-12V or 24V + 1PCS ESD5500E Speed Control Unit + 1PCS MSP675 Sensor
Good universal performance, longevity, stability
Generator Actuator ADC120-12V/24V
The 120 SERIES electric actuator is a rotary output, linear torque, proportional servo. This electromechanical actuator is typically used as an engine fuel control positioning device. An internal spring provides fail safe operation by forcing the actuator to the fuel shut off position when the actuator is de-energized. This design combines fast operation, multi voltage usage, wider rotation angle, and proven reliability. The actuators can operate directly on 12, 24, or 32 volt battery supplies.
Specifications:
1) Available Torque: Max 1.0 lb-ft (1.4 Nm)
2) Maximum Operating Shaft Angular Travel: 25+-1 degree CW/ CCW
3) Power Input
4) Operating voltage: 12 VDC; 24 VDC
5) Normal Operating Current: 2 A at 12 VDC; 1A at 24 VDC
6) Maximum Current-Continuously Rated: 6 A at 12 VDC, 3A at 12 VDC
7) Temperature Range: -65℉ to 200℉(-54℃to 95℃)
8) Relative Humidity: up to 100%
9) All Surface Finishes: Fungus proof and corrosion resistant
10) Mounting: Any position, electrical connector at the top-preferred
11) Vibration: up to 20 G @ 50-500 Hz
12) Testing: 100% Tested
13) Connector (ADC120): supplied with actuator
14) Level: LE1500-1
15) Rod End Bearings ( to attach a # 10-32 THD linkage rod to the lever): BR100 (Right Hand); BR100 (Right Hand)
16) Wiring Harness ADC120: 4 ft. harness supplied with actuator, other lengths available
Speed Controller ESD5550E:
Diesel Generator Control Board ESD5550E is rugged enough to be placed in a control cabinet or engine mounted encosure with other dedicated control equipment. If water, mist or condensation may come in contact with controller, it should be mounted certically. This will allow the fluid to drain away from the speed control unit.
Specifications:
Speed stablity: Better than ±0.25%
Speed range: 1Khz ~ 7.5Khz
Thermostablity: Max ±1%
Idle adjustment: 160 ± 20Hz ~ Rated speed 95%
Power input Voltage: 12V DC 24V DC
Output: 50mA
Signal of speed sensor: 0.5 ~ 120V RMS
MSP675 Magnetic Generator Speed Sensor
:
Range:50-5000Hz
Inductance value:142MH+25%
Resistance value:300Ω MAX
Thread:5/8-18UNF-2A
Off-tooth distance:0.64-0.89mm
Temperature range:-55℃ celsius to 105℃
Idle output:1.5 volts AC Min
MAX output:30 volts AC
What in Package:
1pcs ADC120-12V (or ADC120-24V)
1pcs ESD5500E
1pcs MSP675
NOTE:
1.Your valid phone number is  very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives.
2. Any Customs tax applied to this package should be covered by  buyers.
3.As has been stated on the eBay item description, Import duties, taxes and  charges are not included in the item price and shipping charges.These charges be at the buyer responsibility. meanwhile the customs tax depend  on the buyer local customs office.